Abstract
The effects of laser surface texturing of aluminium alloy targets on the morphologies, wetting properties, and anti-reflection were studied. The parallel micro-trenches with a period of 50 µm were processed by fs-laser line scanning with different laser pulse fluences and laser scanning speeds. The laser textured surfaces showed some micro-cracks, micro-bumps, and micro-porous structures with some nanoparticles decoration. The water wetting response of the samples was measured by static contact angle measurements. With high laser fluence irradiation, the laser-textured Al alloy surfaces exhibited hydrophilic characteristics, while that of low laser fluence irradiation showed hydrophobic characteristics. Furthermore, the anti-reflection performance in the spectral range of 200–1200 nm with the value lower than 5% was obtained at high laser fluence irradiation. The results imply the potential applications of these surfaces in a variety of fields.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
