Abstract

Alumina with a hierarchical macro-/mesoporous structure (MA) was synthesized by a sol–gel route accompanied by phase separation. Then its Sb(V) uptake ability was evaluated in comparison with AlOOH and four different commercial alumina adsorbents. The effect of calcination on the specific surface area, pore properties and the Sb(V) uptake capacities of these MA samples was evaluated. A direct connection between the mesoporous pore properties and the adsorption capacities of mesoporous alumina was not observed. The effect of initial Sb(V) concentrations, contact time, pH and co-existing anions on the Sb(V) removal efficiencies were systematically investigated. Among the six adsorbents, MA exhibited the highest capacity of 118mg/g with an equilibrium Sb(V) concentration of 0.69mg/L, an adsorbent dose of 0.3g/L at pH 5.0±0.1. The Sb(V) uptake kinetics was fast with equilibrium achieved quickly within 1h. No linear correlation existed between the pseudo-second kinetic parameters k2 of the six alumina adsorbents and their pore sizes or pore volumes. A superior pH-dependent adsorption behavior for MA was observed in the pH range of 3–7.3. Common co-existing anions inhibition was minor and would not be a concern in real practice at their natural environmental concentrations in water. XPS characterization showed that Sb(V) was chemically bound to MA surface without surface precipitation of Sb(V) salts and no reduction reaction. 27Al solid state MAS NMR study indicated that adsorption of Sb(V) induced an increase of both pentahedral-coordinated AlO5 and tetrahedral-coordinated AlO4, which occurred at the expense of octahedral-coordinated AlO6 in MA. This change was ascribed to AlO6 surface dissolution, following Al/Sb co-precipitation and Al surface sites rearrangement.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.