Antifouling performance enhancement of PES membranes using hydrophilic nanoparticles of poly(dopamine-acrylate) for oil/water separation

Abstract

Polydopamine-acrylate (P(A-D)x) nanoparticles were blended with polyethersulfone (PES) to fabricate a high-performance hybrid ultrafiltration (UF) membrane for the separation of water from oily wastewater. In tris-alkaline buffer solution at room temperature, P(A-D)x nanoparticles were synthesized by intramolecular Michael addition of dopamine with acrylic acid (AA) monomers. Hybrid PES membranes were prepared using P(A-D)x at 0.05–0.4 wt% and characterized using various assays including Field emission scanning electron microscopy (FESEM), Thermogravimetric analysis (TGA), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), and water contact angle (WCA). The membranes showed a significant increase in hydrophilicity, water permeability, and oil rejection (R). The primary and secondary pure water fluxes of the membrane with 0.2 wt% P(A-D)0.25 were 45% and 110.78% higher than those of neat PES membrane, respectively. For 3300 ppm oil feed solution, water flux during water/oil separation increased by 107%, while the oil rejection (R) remained at 99.08%. The surface of membrane was markedly hydrophilic, with a WCA about 40°, much lower than that of the neat PES membrane (80.67°). UF hybrid membranes also showed a remarkable reduction in oil adhesion on the membrane surface as well as superior antifouling performance for membranes containing 0.2 wt% P(A-D)0.25, flux recovery ratio (FRR) = 84.88 ± 3.27%, reversible fouling (Rr) = 51.12 ± 1.09%, and irreversible fouling (Rir) = 15.12 ± 3.27%. In addition, the pure water flux was 446% higher than that of the unmodified membrane after five cycles (900 minutes).