Abstract
The preparation of epoxy/clay nanocomposites (NCs) and their insertion into coatings are of great importance since the NCs could enhance the protective performances. In this study, epoxy NCs with 1–10 wt% of nanoclay Cloisite 30B (C30B) were prepared by the sonication-assisted solution method. The rheological measurements of epoxy/C30B suspensions revealed non-Newtonian, shear-thinning behavior of the uncured NCs, with an increase in the viscosity, yield stress, and shear modules with increasing organoclay content, while the dispersion effectiveness of C30B decreased. A significant enhancement of the rheological parameters was observed at the second percolation threshold (4.1 vol%) due to the formation of a continuous network of 45-layer-thick tactoids. Although NCs with 1–3 wt% C30B exhibited slightly reduced mechanical and adhesion properties compared with the cured reference epoxy resin, the epoxy primer and topcoat based on NC with 1 wt% C30B generally displayed improved impact resistance and maintained flexibility, pendulum hardness, and good adhesion properties. Two-layer coating systems, i.e., NC-based primers and topcoats, had higher corrosion stability in a salt spray chamber compared to the unmodified system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
