Abstract
Anti-reflective surfaces structures (ARSS) have been successfully fabricated on fused silica windows, lenses and fibers, and spinel ceramics. The reflection loss for spinel was reduced from 7% per surface to 0.9%. For fused silica with ARSS, the reflection loss was reduced to 0.02% near 1 µm. Pulsed laser damage thresholds at 1.06 µm were measured and thresholds as high as 100 J/cm2 were obtained for fused silica windows of up to 10 cm in diameter with ARSS and 850 J/cm2 for silica fibers with ARSS on the end faces. Spinel samples with ARSS showed damage thresholds more than two times higher than that of spinel with traditional AR coatings.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.