Abstract
Biological desulfurization of biogas has been extensively studied using biotrickling filters (BTFs). However, the accumulation of elemental sulfur (S°) on the packing material limits the use of this technology. To overcome this issue, the use of a continuous stirred tank bioreactor (CSTBR) under anoxic conditions for biogas desulfurization and S° production is proposed in the present study. The effect of the main parameters (stirring speed, N/S molar ratio, hydraulic residence time (HRT) and gas residence time (GRT)) on the bioreactor performance was studied. Under an inlet load (IL) of 100 g S-H2S m–3 h–1 and a GRT of 119 s, the CSTBR optimal operating conditions were 60 rpm, N/S molar ratio of 1.1 and a HRT of 42 h, in which a removal efficiency (RE) and S° production of 98.6 ± 0.4 % and 88 % were obtained, respectively. Under a GRT of 41 s and an IL of 232 g S-H2S m–3 h–1 the maximum elimination capacity (EC) of 166.0 ± 7.2 g S-H2S m–3 h–1 (RE = 71.7 ± 3.1 %) was obtained. A proportional-integral feedback control strategy was successfully applied to the bioreactor operated under a stepped variable IL.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
