Abstract
Abstract The thermal expansion behavior of dry solid wood was investigated by dynamic dilatometry and thermal mechanical analysis. Anomalous thermal expansion behavior was observed concerning the displacement change under a constant compression pressure, which was not previously reported. Wood submitted to temperatures below 0°C under dry conditions exhibited a large increment in the linear thermal expansion coefficient (CLTE) and a sudden drop in the CLTE around 50°C as well as above 130°C during heating. In subsequent cooling/heating processes, these anomalous behaviors remained at temperatures below 100°C, although less pronounced, and disappeared at temperatures above 100°C. These behaviors were clearly perceptible in the radial and tangential directions but not in the longitudinal direction. The CLTE depended strongly on the heat and moisture history of the samples and the effects are species-specific.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.