Abstract

Low back-pressure supersonic fan blade flutter in the torsional mode was examined using a controlled-oscillating annular cascade test facility. Precise data of unsteady aerodynamic forces generated by shock wave movement due to blade oscillation and the previously measured data of chordwise distributions of unsteady aerodynamic forces acting, on an oscillating blade were joined, and then the nature of cascade flutter was evaluated. These unsteady aerodynamic forces were measured by direct and indirect pressure measuring methods. Our experiments covered a range of reduced frequencies based on a semi-chord from 0.0375 to 0.547, 6 interblade phase angles and inlet flow velocities from subsonic to supersonic flow. The occurrence of unstalled cascade flutter in relation to reduced frequency, interblade phase angle and inlet flow velocity was clarified including the role of unsteady aerodynamic blade surface forces on flutter. Reduced frequency of the flutter boundary increased greatly when the blade suction surface flow became transonic flow. Interblade phase angles which caused flutter were in the range from 40° to 160° for flow fields ranging from high subsonic to supersonic. Shock wave movement due to blade oscillation generated markedly large unsteady aerodynamic forces which stimulated blade oscillation.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.