Abstract
Si1−xMnx diluted magnetic semiconductor films were deposited on the p-Si (100) single crystal wafer using magnetron sputtering method. Post-rapid thermal annealing treatments were performed at temperatures of 700 °C, 800 °C, and 900 °C in an argon atmosphere for approximately 5 min. Alternating gradient magnetometer, scanning electron microscope, atomic force microscope, X-ray diffraction and X-ray absorption near-edge structure spectra were employed to characterize magnetic properties and structure of the as-grown and annealed films. The films were about 2.8 μm thick and the RMS roughness of the surface was about 5–10 nm. All samples exhibit ferromagnetism at room temperature and the saturation magnetization reaches at the maximum value for the sample annealed at 700 °C. The silicide MnSi1.7 was observed in the annealed samples. X-ray absorption near-edge structure spectra indicated that Mn atoms preferred to occupy substitutional or interstitial sites instead of precipitating to form silicide when annealing at 700 °C. It is inferred that the observed ferromagnetism is attributed to the interstitial and substitutional Mn dimers, which existed mostly in the sample annealed at 700 °C. The weaker ferromagnetism of the 900 °C annealed sample was closely related to the increased content of Mn4Si7 compound.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have