Abstract

Ge–SiO2 films with high Ge/Si atomic ratio of about 1.86 were obtained by co-sputtering of Ge and SiO2 targets and subsequently annealed at different temperatures between 600 and 1000°C in a conventional furnace in order to show how the annealing process influences the film morphology concerning the Ge nanocrystal and/or amorphous nanoparticle formation and to study their electrical behaviour. Atomic force microscopy (AFM) imaging, Raman spectroscopy and electrical conductance measurements were performed in order to find out the annealing effect on the film surface morphology, as well as the Ge nanoparticle formation in correlation with the hopping conductivity of the films. AFM images show that the films annealed at 600 and 700°C present a granular surface with particle height of about 15nm, while those annealed at higher temperatures have smoother surface. The Raman investigations evidence Ge nanocrystals (including small ones) coexisting with amorphous Ge in the films annealed at 600°C and show that almost all Ge is crystallized in the films annealed at 700°C. The annealing at 800°C disadvantages the Ge nanocrystal formation due to the strong Ge diffusion. This transition in Ge nanocrystals formation process by annealing temperature increase from 700 to 800°C revealed by AFM and Raman spectroscopy measurements corresponds to a change in the electrical transport mechanism. Thus, in the 700°C annealed films, the current depends on temperature according to a T−1/2 law which is typical for a tunnelling mechanism between neighbour Ge nanocrystals. In the 800°C annealed films, the current–temperature characteristic has a T−1/4 dependence showing a hopping mechanism within an electronic band of localized states related to diffused Ge in SiO2.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call