Annealing experiments in heavily arsenic-doped (Hg,Cd)Te

Abstract

Arsenic doped molecular beam epitaxy (MBE) (Hg,Cd)Te films were grown on (Cd,Zn)Te substrates. The concentration of arsenic was varied from 5 x 1018 cm-3 to 1 x 1020 cm-3. After the growth, the epitaxial layers were annealed at various partial pressures of Hg within the existence region of (Hg,Cd)Te at temperatures ranging from 400 to 500°C. Hall effect and resistivity measurements were carried out subsequent to the anneals. 77K hole concentration measurements indicate that for concentrations of arsenic <1019 cm−3, most of the arsenic is electrically active acting as acceptors interstitially and/or occupying Te lattice sites at the highest Hg pressures. At lower Hg pressures, particularly at annealing temperatures of 450°C and higher, compensation by arsenic centers acting as donors appears to set in and the hole concentration decreases with decrease in Hg pressure. These results indicate the amphoteric behavior of arsenic and its similarity to the behavior of phosphorus in (Hg,Cd)Te previously inferred by us. A qualitative model which requires the presence of arsenic occupying both interstitial and Te lattice sites along with formation of pairs of arsenic centers is conjectured.