Abstract
This work is concerned the tensile properties of the secondary Ni-based single-crystal superalloy DD6 near [001] orientation at 760°C. In this study, anisotropic tensile properties of DD6 alloy within 10° of the [001] orientation were exhibited at 760°C. The yield strength and ultimate tensile strength of DD6 alloy oriented close to [001] direction was the highest. As the deviation off the [001] orientation increased, both 0.2% yield strength and ultimate tensile strength was decreased. The specimens oriented close to [001]-[111] boundary exhibit higher yield strength and ultimate tensile strength than the specimens oriented close to [001]-[011] boundary. Numerous of dislocations can be found in the γ matrix channels during the tensile deformation. A number of dislocation pairs and few of stacking faults are found in the γ' precipitates after the tensile at 760°C. The morphology of γ' phases in DD6 alloy maintained cubical during the tensile deformation at 760°C. With Schmid's Law, the mechanism of anisotropic tensile properties in DD6 alloy near [001] orientation is analyzed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.