Anisotropic hydraulic conductivity of as-compacted, bare and vegetated soils

Abstract

Soils are generally considered anisotropic with respect to hydraulic conductivity, while the evolution of the anisotropy condition is unknown for bare and vegetated soils. Therefore, the main goal of this study is to compare the anisotropic hydraulic conductivity of as-compacted, bare and vegetated specimens. Accordingly, a series of 54 hydraulic conductivity tests was conducted in a custom-made cube triaxial permeameter. The as-compacted specimens were revealed as isotropic because the loosely packed preparation procedure resulted in a dominant flocculent structure. However, a five-fold increase in the anisotropy ratio of bare specimens was measured along the isotropic loading path because of the induced surficial degradation zone formed by irrigation and desiccation processes, as evident in preliminary observations and crack network analysis. The variations in anisotropy ratio compared against void ratio function of vegetated soil generally fall below the corresponding function of the bare soil. The function was revealed to have a crossed nature, varying from sub-isotropic to super-isotropic states, corresponding to the lower and upper bounds of 0·3 and 3, respectively. It was postulated that vegetation impacts the flow differently by reducing the potential of desiccation cracks, creating preferential flow through the propagation of primary roots and clogging flow channels by secondary roots.