Abstract
The anisotropic compressive properties of 0.1, 1 and 2wt.% multiwall carbon nanotube/polyurethane foam (MWCNT/PUF) composites along the two main directions of transversely isotropic foams are investigated. Special attention is devoted to the anisotropic property-structure relationship of the nanocomposite foams governed by the cell size and morphology, which is investigated by microscopy and the use of existent micromechanical models which consider the cell geometry. Significant enhancement of compression properties with respect to the neat foam occurred for 0.1 and 1wt.% tested along the foam’s free raising direction, while more modest property enhancement occurred along the foam’s transverse direction. The cells of the free rising foams are elongated and stronger in the rising direction and the foam’s structural anisotropy increases with the addition of small amounts (0.1wt.%) of MWCNTs. The stiffness and strength ratios of the two main anisotropic directions may be reasonably predicted by using a simple parallelepiped cell model, but more accurate predictions are achieved when a tetrakaidecahedron representation is assumed, albeit more experimental parameters are necessary.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.