Abstract
The characteristics of (110) silicon anisotropic bulk etching are studied with varied temperature and concentration of aqueous KOH solution. The etch rates of (110) and (111) planes increase with increasing temperature but decrease with increasing concentration. The maximum etch rate ratio is above 150 at 45 exact wt.% and 60°C of aqueous KOH solution. Surface roughness varies greatly with concentration, and the minimum roughness is observed in an aqueous KOH solution of 41 exact wt.%. In 41 exact wt.% aqueous KOH solution at 65°C, comb structure have been fabricated which are 8μm wide, 150μm high and separated by 7μm gaps, using a comb mask pattern 10μm wide with 5μm gaps.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
