Abstract
The combination of angle-resolved laser ablation with the use of a collimated beam is presented as a new approach to increase the depth-resolved capabilities of laser-induced breakdown spectrometry (LIBS). The effect of beam conditioning and the reduction of the effective sampling depth due to the angular dependence of laser ablation allow ablation rates lower than 2 nm/pulse for coated materials (Sn-coated steels and Cr-coated samples). Spectral information is obtained on a single-laser-shot basis. The effect of incidence angle has been examined from differentiated emission profiles, demonstrating the beneficial effect of working at incidence different from normal. A compromise between depth resolution and emission signal must be found at large angles due to the lower irradiance resulting from the increase in beam size at the interface for large angles of incidence. A comparison of the proposed approach with the analysis provided by a commercial glow-discharge device [glow discharge optical emission spectroscopy (GD-OES)] demonstrated quite satisfactory results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.