Anelasticity of Mg-Mn and Mg-Gd alloys

Abstract

Anelastic relaxation at sub-resonance frequency (from 0.01 to 100 Hz), temperature (from 0 to 450°C) and amplitude (ε0 from 5×10−5 to 10−3) range in binary Mg-0.8 wt%Mn (0.36 at%) and Mg-2 wt%Gd (0.31 at%) in as-extruded and annealed states was experimentally studied and analyzed, to characterize acting thermally activated and structural relaxation effects. Activation parameters for thermally activated anelastic effect and structural studies suggest that it is the grain boundary relaxation with dominating large angle boundaries, while the high-temperature background is mainly controlled by dislocations sliding. Pseudo peak at ∼290 °C (Mg-Mn) and ∼410 °C (Mg-Gd) is the result of the recrystallization process in the as-extruded samples, which indicates that the addition of Gd restricts the recrystallization of Mg compared with the addition of Mn. Analysis of amplitude dependencies of internal friction in the frames of Granato and Lücke approach suggests higher density of movable dislocations in as-extruded Mg-Mn alloy.