Abstract
As the use of headed bars in reinforced concrete (RC) beam or column members has increased in recent years, preventing their unexpected failure modes has become an increasingly important part of their design. Headed bars that are embedded in concrete under tensile loading have six potential failure mechanisms, one of the critical failure modes is side-face blowout failure (SBF). Since the selected existing models of anchorage strength related to SBF for a headed bar were developed based on specimens with normal-strength reinforced concrete, they should be experimentally verified to investigate their application to high-strength reinforced concrete (HSRC) members. Therefore, in this work, HSRC external beam-column joints are designed based on the results of a parametric study and ACI 318-14. Based on the experiment (12 full-scale specimens) and results of simulations using finite-element analysis (FEA), when the diameter of a headed bar that is embedded in HSRC external beam-column joints is ≤ 35 mm, its minimal clear concrete cover could be reduced to be the diameter multiplied by 1.5. Additionally, with the diameter or yield strength increasing, this work also provides the engineering graphs for designing headed bars in HSRC external beam-column joints to prevent SBF before the bar yielding.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.