Abstract
Two-step thermal oxidation of commercially pure Ti was investigated with a focus on the formation of anatase. A first-step treatment was conducted in Ar–(0.1–20)%CO atmosphere at a temperature of 773–1173 K for a holding time of 0 or 86.4 ks, and a subsequent second-step treatment was conducted in air at 473–873 K for 0–86.4 ks. Titanium oxides and titanium oxycarbide were obtained in the first step, with relative amounts depending on heating temperature, holding time, and CO partial pressure. An anatase-rich layer on Ti was obtained after second-step treatment in air at 573–773 K in cases where single-phase titanium oxycarbide formed in the first step. Thus, the formation of single-phase titanium oxycarbide in the first step and temperature control in the second step were required for the formation of an anatase-rich layer. The bonding strength of an anatase-rich layer with a thickness of 0.5 μm was calculated to be around 90 MPa. This study reveals the conditions under which an anatase-rich layer with excellent adherence to Ti can be prepared by thermal oxidation.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
