Analytical perspective on trace element species of interest in exploration

Abstract

Analysis of soil and sediment samples, using selective extraction methods to distinguish different phases, is of particular interest in exploration geochemistry to locate deeply buried mineral deposits. There are various mechanisms of binding labile elements in the secondary environment, including physical and chemical sorption, precipitation, chelation and complexation. Phases present in soils and sediments which are likely to scavenge `free' elements include amorphous Mn and Fe oxides, the humic and fulvic components of humus, and clays. This paper reviews these forms of trace elements and the methods in current use to quantify them. Examples of precision data, both for control and survey samples, are given with respect to trace elements dissolved from the `soluble organic' component of humus, Mn oxides and amorphous Fe oxides. The high sensitivity of inductively coupled plasma mass spectrometry (ICP–MS) is required to measure accurately and precisely a large suite of trace elements, especially where only small fractions of elements are dissolved by such leaches as the commercially available Enzyme and MMI (Mobile Metal Ion) extractions. The relative standard deviations (RSD) obtained for 33 elements (e.g. Ag, Cd, In, I) in the standard reference sample (SRM), TILL-2, are in the range 0.5–8% for the hydroxylamine hydrochloride (NH 2OH·HCl) leach designed to extract hydrous Fe and Mn oxides. The corresponding RSDs for elements in the reactive Mn oxide phase extracted by the Enzyme leach are in the range 3–19% except for some trace elements at levels close to detection limit (e.g. Cd, Bi). The RSDs obtained for field duplicates are inferior to those for analytical replicates (i.e. sample splits), probably a reflection of different concentrations of the host phase. In one soil survey, the Fe extracted by a 0.25 M NH 2OH·HCl leach ranged conservatively from 0.2 to 1.7% whereas the Mn extracted by the Enzyme leach varied extensively, from 0.3 to >999 ppm. In contrast, precision, at 1–7% RSD, for field duplicates was found to be comparable with that for both analytical duplicates and the SRM, LKSD-4, for elements associated with the humic and fulvic component of humus samples sieved to <177 μm.