Abstract

Purpose.In this paper we present and validate an analytical model of water inflow and rising level in a flooded mine and examine the model robustness and sensitivity to variations of input data considering the examples of three closed hard-coal mines in Germany. Methods. We used the analytical solution to a boundary value problem of radial ground water flow to the shaft, treated as a big well, and water balance relations for the series of successive stationary positions of a depression cone to simulate a mine water rebound in the mine taking into account vertical distribution of hydraulic conductivity, residual volume of underground workings, and natural pores. Findings. The modeling demonstrated very good agreement with the measured data for all the studied mines. The maximum relative deviation for the mine water level during the measurement period did not exceed 2.1%; the deviation for the inflow rate to a mine before its flooding did not exceed 0.8%. Sensitivity analysis revealed the higher significance of the residual working volume and hydraulic conductivity for mine water rebound in the case of thick overburden and the growing significance of the infiltration rate and the flooded area size in the case of lower overburden thickness. Originality.The developed analytical model allows realistic prediction of transient mine water rebound and inflow into a mine with layered heterogeneity of rocks, irregular form of the drained area, and with the inflow/outflow to a neighboring mine and the volume of voids as a distributed parameter without gridding the flow domain performed in numerical models. Practical implications.The study demonstrated the advantages of analytical modeling as a tool for preliminary evaluation and prediction of flooding indicators and parameters of mined out disturbed rocks. In case of uncertain input data, modeling can be considered as an attractive alternative to usually applied numerical methods of modeling ground and mine water flow.

Highlights

  • The modeling demonstrated very good agreement with the measured data for all the studied mines

  • Sensitivity analysis revealed the higher significance of the residual working volume and hydraulic conductivity for mine water rebound in the case of thick overburden and the growing significance of the infiltration rate and the flooded area size in the case of lower overburden thickness

  • In this paper we examine the influence of four parameters on model sensitivity that are the radius of the flooded area R, the specific inflow rate of infiltration water to the flooded area hiw, the volume of residual underground workings Vrw, and hydraulic conductivity kf; the last two parameters depend on the vertical coordinate z

Read more

Summary

Introduction

The modeling demonstrated very good agreement with the measured data for all the studied mines. The maximum relative deviation for the mine water level during the measurement period did not exceed 2.1%; the deviation for the inflow rate to a mine before its flooding did not exceed 0.8%. Sensitivity analysis revealed the higher significance of the residual working volume and hydraulic conductivity for mine water rebound in the case of thick overburden and the growing significance of the infiltration rate and the flooded area size in the case of lower overburden thickness

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call