Abstract
A novel analytical method has been proposed to compute radiation mode RCS of phased arrays. The array RCS is computed by tracing the path of an impinging EM signal as it travels through the array system. The scattered field contribution from each component of array and its feed network is expressed in terms of the reflection and transmission coefficients. The individual contributions are then coherently superimposed to arrive at total array RCS. The proposed method can be used to obtain the radiation mode RCS of any conventional phased array or low profile patch array with high impedance surface (HIS)-based substrate or superstrate. Results are shown for dipole array with parallel feed network, corporate-fed patch array with conventional metallic ground plane and HIS-based hybrid ground plane. This approach is applicable for estimation and control of radiation mode RCS of any type of phased array.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.