Analytical Design Space of Power Amplifiers Including the Class-A/B/J Continuum for Dynamic Load Modulation

Abstract

In this paper, an analytical design space of power amplifiers (PAs) including the Class-A/B/J continuum for dynamic load modulation (DLM) at the current generator plane (CGP) is proposed based on the theory of load modulated (LM) continuous Class-B/J PAs. By introducing a biasing operation factor ρ, the theory of DLM PAs provides an analytical design space for all the operation modes from Class-B/J mode to Class-A mode. The analytical design space of DLM PAs shows that high efficiency is maintained at a large dynamic range of output power back-off (OPBO) with a purely resistive load modulation at the CGP when Class-B/J mode is performed. For deep Class-AB mode, the analytical design space of the DLM PAs shows that a combination of resistive and reactive load modulation at the CGP is used to maintain the high efficiency at the OPBO. The effectiveness of the proposed analytical design space is validated by load-pull measurements of a bare-chip gallium nitride (GaN) device.