Analytical control of silicified graphite SG-P

Abstract

An analytical scheme for the analysis of silicified graphite SG-P, a four-phase composite material consisting of silicon, carbon, silicon carbide and silicon dioxide, has been developed. The procedure can be successfully used in the quality control of raw materials and in the study of the phase composition of finished products The porosity and density of the graphite base, as well as the impurities contained in the base and silicon change the course of silicification and the properties of the finished product as well. The impurities are the main reason for the formation of delamination, swelling, cracking and light spots on the treated surfaces. It should be noted that the iron content 0.023 – 0.17 wt.% in the carbon material intended for silicification, leads to catalytic graphitization of the artificial graphite and dispersion in the silicon melt. Methods of rapid assessment of the quality of raw materials are to be used to provide quick understanding of their suitability for manufacturing final products on their base. Quality control of the silicified graphite produced at the JSC «Research Institute Graphite» is carried out by determination of the phase composition of the finished product by chemical and X-ray diffraction methods of analysis. The content of silicon carbide (not less than 45%), unbound silicon and carbon (not more than 20 and 35%, respectively) affects the corrosion resistance and thermal expansion of silicified graphite.