Abstract
Skew bridges are common in highways and railway lines when non perpendicular crossings are encountered. The structural effect of skewness is an additional torsion on the bridge deck which may have a considerable effect, making its analysis and design more complex. In this paper, an analytical model following 3D beam theory is firstly derived in order to evaluate the dynamic response of skew bridges under moving loads. Following, a simplified 2D model is also considered which includes only vertical beam bending. The natural frequencies, eigenmodes and orthogonality relationships are determined from the boundary conditions. The dynamic response is determined in time domain by using the "exact'" integration. Both models are validated through some numerical examples by comparing with the results obtained by 3D FE models. A parametric study is performed with the simplified model in order to identify parameters that significantly influence the vertical dynamic response of the skew bridge under traffic loads. The results show that the grade of skewness has an important influence on the vertical displacement, but hardly on the vertical acceleration of the bridge. The torsional stiffness really has effect on the vertical displacement when the skew angle is large. The span length reduces the skewness effect on the dynamic behavior of the skew bridge.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.