Abstract

The nonlinear pipe-soil interaction model and the initial imperfections are predominantly factors that affect the lateral buckling behaviour of subsea pipelines with a high-temperature. In this study, mathematical models, taking these two factors into account, are proposed to simulate lateral buckling of subsea pipelines. Analytical solutions are derived from the assumption of rigid-plastic pipe-soil interaction, while numerical results are obtained when considering nonlinear pipe-soil interaction. The analytical and numerical results have an excellent agreement except for the negligible discrepancy in the pre-buckling state. The discrepancy is induced by the difference of mobilisation distance in rigid-plastic and elastic-plastic pipe-soil interaction models. After the analysis of snap-through phenomenon, the influence of breakout resistance, amplitude and half-wavelength of imperfection on the post-buckling behaviour is studied. Finally, the upper and lower bound critical temperature differences are discussed as well. The results show that the hysteresis cycle between pre-buckling and post-buckling states may appear under cyclic thermal loading. The snap-through phenomenon and the hysteresis cycle can take place more easily for large breakout resistance, small amplitude and large wavelength of imperfection. In the post-buckling state, the maximum stress uplifts with increasing breakout resistance or amplitude of imperfection, while it reduces with escalating wavelength of imperfection.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call