Abstract

최근, tunnel boring machine (TBM)을 이용한 도심지 지중 전력구 터널 건설이 증가하고 있다. 쉴드 TBM을 이용한 기계화 터널 굴착 공법은 재래식 공법에 비해 지반침하를 최소화 하고 발파에 의한 진동을 줄일 수 있는 장점이 있다. 국내에서는 earth pressure balance(EPB) 쉴드 TBM이 주로 사용되고 있다. 그러나 전력구 터널 굴착을 위한 쉴드 TBM 공법이 증가함에도 불구하고, 전력구 쉴드 TBM 터널의 거동 분석에 관한 연구는 미비한 실정이다. 본 연구에서는 후방주입 거리에 따른 전력구 쉴드 TBM 터널의 거동 특성을 분석하고, 굴착면 지반 손실과 후방주입 거리와의 상관관계를 도출하고자 한다. 쉴드 TBM을 이용한 터널 굴착은 3D FEM을 이용하여 시뮬레이션 하였다. 뒷채움 그라우트가 설치되는 거리의 변화에 따른 축력, 전단력, 휨 모멘트와 같은 단면력을 검토하고 지표면에서의 연직 변위를 분석하였다. 또한, 유한요소해석으로 얻어진 결과와 안정성 분석에 기초하여, 지반과 터널 구조물의 안정성을 확보할 수 있는 뒷채움재 주입시기를 결정할 수 있다. Recently, tunnelling with TBM is getting popular for the construction of cable tunnel in urban area. Mechanized tunnelling method using shield TBM has various advantages such as minimization of ground settlement and prevention of vibration induced by blasting that should be accompanied by conventional tunnelling. In Korea, earth pressure balance (EPB) type shield TBM has been mainly used. Despite the popularity of EPB shield TBM for cable tunnel construction, study on the mechanical behavior of cable tunnel driven by shield TBM is insufficient. Especially, the effect of backfill grout injection on the behavior of cable tunnel driven by shield TBM is investigated in this study. Tunnelling with shield TBM is simulated using 3D FEM. The distance of backfill grout injection from the end of shield skin varies. Sectional forces such as axial force, shear force and bending moment are monitored. Vertical displacement at the ground surface is measured. Futhermore, the relation between volume loss and the distance of backfill grout injection from the end of skin plate is derived. Based on the stability analysis with the results obtained from the numerical analysis, the most appropriate injection distance can be obtained.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.