Abstract
The solar powered cooling system based on desiccant coated heat exchanger (DCHE) is an alternative to traditional vapor compression cooling system (VCCS) due to its energy-saving and eco-friendliness. To obtain improved performance, high-porosity Metal-Organic Framework (MOF) is introduced as desiccant. In our study, Cu-BTC (HKUST-1) was fabricated and certified with high purity and good crystallization by X-ray diffraction (XRD). N2 isotherm adsorption-desorption properties of MOF were investigated. Results show that MOF has co-existence of micropores and mesopores with relatively large specific surface area and pore volume. Water vapor isotherm adsorption of MOF and type B silica gel (SGB) was conducted. Isotherms indicate that moisture uptake of MOF is higher than that of SGB at low relative humidity. A dynamic mathematical model of this system was established. The solar performance was evaluated firstly. Results suggest that solar collector can provide 52.5–80.4 °C hot water from 9:00 to 19:00. Then the simulation was conducted under American Air-conditioning and Refrigeration Institute (ARI) summer and Shanghai August conditions. Results exhibit that MOF coated heat exchanger (MCHE) has more significant enhancement of dehumidification performance than SGB coated heat exchanger (SCHE) with increased regeneration temperature and MCHE is more suitable for application under ARI summer condition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
