Analysis of WLAN’s Receiving Signal Strength Indication for Indoor Positioning

Abstract

The location method based on Received Signal Strength Indication (RSSI) ranging has the advantages of low development cost and simple implementation mechanism, and is the mainstream indoor location method nowadays. However, at present, there is a lack of systematic research on the characteristics of Access Point (AP) received signal strength, which cannot meet the signal strength characteristics required by specific indoor positioning environment. Detailedly, in this study, the indoor distribution characteristics of 2.4 GHz RSSI were analyzed experimentally from three influencing factors including antenna orientation of the receiver, type of wireless network card of the receiver and height difference of the transmitting and receiving antenna. The experimental results show that: (1) The RSSI value measured is the strongest When the antenna of the receiver is vertically oriented to the antenna of the transmitter, while the antenna is vertically backward to the transmitter, it is the opposite. The difference between the strongest signal and the weakest signal is 20%–25% at the same test point. (2) The network card with a large measurement range should be selected for data collection on the premise that the quantization step size is 1 and the smoothness is small. Avoiding using the network card for positioning with the maximum limit of measurement range is proposed also. (3) The path loss index of the ranging model is affected by the height difference of the antenna, resulting in a deviation of 0.1–0.2.