Analysis of turbulent cavitation effects on water-lubricated bearing in single screw compressors

Abstract

PurposeTo guide the stable radius clearance choice of water-lubricated bearings for single screw compressors, this paper aims to analyze the effects of turbulence and cavitation on bearing performance under two conditions of specified external load and radius clearance.Design/methodology/approachA modified Reynolds equation considering turbulence and cavitation is adopted, based on the Jakobsson–Floberg–Olsson boundary condition, Ng–Pan model and turbulent factors. The equation is solved using the finite difference method and successive over-relaxation method to investigate the bearing performance.FindingsThe turbulent effect can increase the hydrodynamic pressure and cavitation. In addition, the turbulent effect can lead to an increase in the equilibrium radius clearance. The turbulent region exhibits a higher load capacity and cavitation rate. However, the increased cavitation negatively impacts the frictional coefficient and end flow rate. The impact of turbulence increases as the radius clearance decreases. As the rotating speed increases, the turbulence effect has a greater impact on the bearing characteristics.Originality/valueThe research can provide theoretical support for the design of water-lubricated journal bearings used in high-speed water-lubricated single screw compressors.Peer reviewThe peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-01-2024-0029/