Analysis of Thermal and Dielectric Loss Features of Lunar Regolith Considering Real‐Time Effect Solar Irradiance

Abstract

AbstractSolar irradiance received at the lunar surface is crucial for interpreting brightness temperatures detected by orbiters and for understanding the thermal, physical, and dielectric properties of the lunar regolith. We developed a real‐time effect solar irradiance (ESI) model that accounts for the influence of surface relief and terrain shading. This model was integrated with a standard thermal model to examine ESI fluctuations and their impacts on the diurnal physical temperature variations. To assess the effects of spatial resolution, we selected four locations with significant ESI disparities for simulation, then compared lunar surface temperatures at various spatial scales, ranging from 20 m to 25 km. Utilizing brightness temperature data obtained from the Chang'E‐2 (CE‐2) microwave radiometer (MRM), we integrated the shallow physical temperature profiles with the radiative transfer equation to simulate brightness temperatures and determine dielectric loss at different frequencies. In the Von Kármán crater, the received ESI exhibits a cyclical pattern of approximately 18 years and areas with rugged topography may exhibit larger ESI variations (∼7%). We found that the spatial resolution of ESI has a minimal effect on the physical and brightness temperatures at resolutions of 10 km or coarser. At the shallow layer, the average dielectric loss values are 0.0128–0.0170, 0.0083–0.0110, 0.0055–0.0073, and 0.0061–0.0081 for the CE‐2 frequencies of 3, 7.8, 19.35, and 37 GHz, respectively. The integration of real‐time ESI modeling, thermal dynamics, radiative transfer equations, and observational data enhances our comprehension of the physical temperature profile and thermal characteristics of shallow regolith.