Abstract

In the field of internal combustion engines, the Low Temperature Combustions (LTC) appear to have the potential to reduce the formation of both soot and nitrogen oxides. One of the most promising LTC is Reactivity Controlled Compression Ignition (RCCI) which is based on the combustion of a lean low reactivity fuel-air mixture generated in the intake manifold and autoignited by small injections of high reactivity fuel introduced at high pressure in the combustion chamber. By the combination of net-zero natural gas and biodiesel, such LTC methodology might represent a suitable solution moving toward zero-emissions in transportation sector.Despite the potential to reduce pollutant emissions, Low Temperature Combustion strategies face a challenge in controlling the angular position where the combustion takes place which can be overcome by a proper management of the high-pressure injections.One potentially interesting application is related to trucks, mainly because they have long periods of idling, since emissions can be drastically reduced by means LTC. A single cylinder research engine for heavy duty application is operated under steady state conditions at low load and speed to analyze the possibility of controlling the engine behavior in dual fuel RCCI mode. The results indicate that the combustion mode switches from the dual-stage to gaussian within a narrow angular range. A further advance of the start of injection can generate misfires and significant variations in typical combustion indexes, while a delayed start of injection can cause impulsive combustion that rises the cylinder temperature and results in high-frequency pressure oscillations inside the combustion chamber. These oscillations are related to the combustion chamber typical resonance frequency, and if relevant in amplitude and persist for a long time, they might generate a potential source of failures.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call