Analysis of the velocity field in a large rectangular channel with lateral shockwave

Abstract

In this work the authors describe the main characteristics of the velocity field of hydraulic jumps in a very large channel where lateral shockwaves occur. Experiments were carried out at the Coastal Engineering Laboratory of the Water Engineering and Chemistry Department of the Technical University of Bari (Italy). Extensive flow velocity measurements were investigated in order to have a clearer understanding of both hydraulic jump development and lateral shockwave formation in a very large channel. Eight experiments were performed in a 4m wide rectangular channel; the experiments differed in the inlet Froude number F0 and the jump type. Seven tests were carried out with undular jumps and one with a roller jump. The flow velocity and the flow free surface measurements were taken using a two-dimensional Acoustic Doppler Velocimeter (ADV) and an ultrasonic profiler, respectively. The experimental results can be summarized as follow: (i) the formation of well developed lateral shockwaves similar to those of oblique jumps were observed; (ii) the comparison of the experimental and theoretical data shows that the classic shockwave theory is sufficiently confirmed in the analyzed range of Reynolds number, taking into account the experimental errors and the difference between the theoretical and experimental assumptions; (iii) the transversal flow velocity profiles in the recirculating zone show a good agreement with the numerical simulations presented in literature in the case of a separated turbulent boundary layer over a flat plate. This conclusion enables us to confirm the hypothesis that the lateral shockwaves in the channel are the result of a boundary layer which, as observed, forms on the channel sidewalls.