Analysis of the temporal, spatial, and frequency law of the internal flow in a prototype vaned mixed‐flow pump

Abstract

AbstractMixed‐flow pump is a typical pump using in low‐head cases of water lifting. The flow field pulsation is usually an important issue in the operation of mixed‐flow pumps and their pumping statins. Due to its large size, it is difficult to monitor the internal flow characteristics well, based on computational fluid dynamics, we use 5678 monitoring points which arranged in the impeller and fixed vane with using the high pulsation tracking network, and the pressure pulsation signals are analyzed by fast Fourier transform and variable mode decomposition to decompose the main frequency and intensity of the pressure pulsation signals, then analyze the energy dissipation with the entropy production rate (EPR). It is found that there are strong low‐frequency (0.416, 0.625, and 1.67 Hz) pressure pulsation near hub, and the pressure pulsation on the shroud is stronger than that on the hub (at least three times or more); there are strong and stable pressure pulsation (25 Hz) on the shroud generated by the rotor–stator interference (RSI); and the EPR in the flow field can be well combined with the signal. Reasonably allocating material strength and controlling the number of vanes and impellers to avoid producing a common multiple can avoid pressure pulsation caused by RSI and reduce energy dissipation. Therefore, it is very effective in improving the efficiency of this part. Under low flow conditions, the siphon outflow passage can predict the high‐frequency (45.833 Hz) attenuation area well through the phase signal decomposition of the signal, which has certain significance for improving its stability and efficiency.