Abstract
Backward erosion piping is an important failure mechanism for water-retaining structures. It results in the formation of shallow pipes at the interface of a sandy or silty foundation and a cohesive cover layer. This paper analyzes the depth of these erosion pipes through small-scale experiments. The development of the pipe depth reveals a lot of information on the backward erosion process, but it had never been measured systematically during the erosion process. Our analysis shows that the pipes are extremely shallow (in the order of mm) and that the pipe depth increases slightly, as piping progresses. Furthermore, a relation is found between pipe depth, grain size, soil permeability, and pipe length. The experimentally obtained depths are in good agreement with those obtained with theoretically determined pipe depths based on pipe hydraulics. Finally, the experiments are compared to 2D numerical simulations using Sellmeijer’s mathematical model and 3D numerical simulations with the correct pipe dimensions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.