Abstract
Different machining methods result in diverse morphologies on the surface of gears. Under mixed lubrication, the friction and contact behavior of the real morphology interface becomes more complex. This study aims to analyze the influence of different process tooth surface micro-morphologies on the lubrication performance of the meshing area of double circular arc gears. Focusing on elastohydrodynamic lubrication (EHL) characteristics of the double circular arc gears as the research object, the study involved measuring the three-dimensional morphology of the meshing position of the double circular arc gears. Non-Gaussian simulation technology was then used to characterize the micromorphology of the tooth surface resulting from different processes (i.e. hobbing process and skiving process). The tooth surface suction speed was determined based on the meshing characteristics of double circular arc gears. Based on the theory of point contact EHL, Reynolds equation and film thickness equation considering micromorphology were derived, and numerical solutions were obtained using the multi-grid method. A point contact EHL model for double circular arc gears was established considering the micromorphology of tooth surfaces in different processes. Results show that, the oil film pressure is positively correlated with rotational speed and torque. The oil film thickness is positively correlated with rotational speed, and negatively correlated with input torque. The negative of micro-morphology on the tooth surface on the lubrication performance could lead to an increase in pressure fluctuations and the absence of the second pressure peak. The uneven distribution of oil film and the lager roughness value could result in obvious fluctuations. The lubrication performance of the contact area in the gear hobbing process is superior to that in the gear skiving process. This study lays the foundation for further exploring the coupling characteristics between the double circular arc gear transmission system and elastic fluid dynamic lubrication. Keywords: Double circular arc gears, Point contact, Mixed EHL, Lubrication characteristics, Micro- morphology.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
