Abstract
The superconducting coils of the Wendelstein 7-X (W7-X) stellarator use a cable-in-conduit conductor that is wound as double layers. These double layers are connected by low-ohmic joints to limit ohmic heating. All joints were equipped with voltage taps to allow identification of the double layer causing a quench. During the current tests of the superconducting coils, the differences between adjacent voltage taps were measured, and the joint resistances between the double layers were estimated. The cryogenic tests of the 50 nonplanar and 20 planar coils provided a unique opportunity to analyze the variation of the resistance of 250 joints of the nonplanar coils and of 40 joints of the planar coils. The statistical analysis shows that the resistance of most of the joints was well below the specified value of 1 nΩ.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
