Abstract
In this work, an analysis on the influence of fibre-orientation in the progression of delamination was carried out. The study was focused on a cracked beam according to an End Notch Flexure test configuration. The Serial/Parallel Mixing Theory was used as the composite constitutive law along with a continuum damage model to simulate delamination. This mathematical approach was implemented in a custom-made FEM code and applied to model the delamination progression. The model was validated with two sets of experimental results from the literature involving 0° fibre-oriented laminates. After validation, a beam made of plies oriented between 0° and 90° was analysed. The model predicts the loss of stiffness and strength due to the increment of fibre angle. In addition, the stress concentration phenomenon at the crack tip and delamination onset was properly represented. The difference observed in the progression of delamination along the width of the beam highlights the need for a three-dimensional representation to model fibre-oriented beams.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
