Abstract

Electropolishing is a surface finishing process of metals and alloys that enhances brilliant surface finishes with low surface roughness values. The most widely used electrolytes for the electropolishing of stainless steel are varying concentrations of phosphoric and sulphuric acid, and occasionally additives such as chromic acid. The objective of this study was to assess the performance of three commonly used industrial electrolytes in terms of the surface finish of electropolished stainless steel AISI 316L. Each electrolyte had varying sulphuric-phosphoric acid combinations with or without chromic acid. The following electropolishing conditions were assessed: current density, bath temperature, electropolishing time, and initial surface texture. The results revealed that adding chromic acid to the electrolyte did not significantly enhance surface finish, and electropolishing ranges were quite similar for all three electrolytes.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.