Analysis of the Influence of Different Construction Joints on the Ductility of Cast-in-Place Frame Structure

Abstract

This article through to the two common cast-in-situ frame structure (casting of a whole, with a construction joint) and 6 root not construction joints under axial pressure ratio through concrete columns of different processing low reversed cyclic loading experiment, study their experimental phenomena, hysteresis curves, displacement ductility, stiffness degradation, thus draw the conclusion: 1, the existence of the construction joint can lead to the decline of ductility of frame structure. 2. When the test axial pressure is relatively low, the presence or absence of construction joints and different treatment methods will obviously affect the ductility of the cast-in-place frame structure. 3. When the test axial pressure is relatively high, the presence or absence of construction joints and different treatment methods will not have a significant impact on the ductility of the cast-in-place frame structure.