Abstract
As the core component of centrifugal compressor impeller, blade's performance quality has a crucial influence on the structure strength and aerodynamic performance of the compressor. In this paper, by using NUMECA software to solve the Reynolds averaged Navier-Stokes (RANS) equation to simulate centrifugal impeller passage of steady three-dimensional viscous flow, the impellers whose different parts of the blade surface contain profile error and the impellers which contain different sizes of surface profile error have been carried on the numerical analysis. Finally compared with the designed impeller, the influence of machining error on the impeller aerodynamic performance is analyzed. The results show that the machining error makes an impact on the performance of the impeller, leading to the decrease of the impeller efficiency and pressure ratio. For the front, middle and back of the blade, the machining error which is located in the middle of the blade has the greatest influence on the performance of the impeller, and considering the error of the front, middle and back, the error of regular S-type is the biggest of all. After adding different size of regular S-type surface profile error, efficiency and pressure ratio lost maximum occurring under the condition of the surface profile of 0.15mm, rather than in the maximum surface profile of 0.2mm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.