Analysis of the Flow Field at the Tip of an Axial Flow Compressor during Rotating Stall Process Based on the POD Method

Abstract

Rotating stalls are one of the most dangerous phenomena to be avoided in the designing and operating of axial flow compressors. An understanding of the evolution of the flow characteristics around the rotor tip region is important to study the process of stall development. In this paper, some critical characteristics of the stall-related structures, which could not be observed by the traditional analysis methods, are understood by using the proper orthogonal decomposition (POD) method. The detailed unsteady flow fields in a typical transonic axial flow compressor during the stall process are obtained by the validated numerical simulation. Thereafter, the proper orthogonal decomposition method, as a method for model reduction and decomposition, is adopted to extract the flow characteristics from the numerical results of the stall process. It is found that the flow characteristics during the stall process can be well decomposed by the POD method. The pre-stall POD results show that the important flow features can be extracted and revealed in the low-order modes, which are not obvious in the original flow field. When the stall cells are formed and developed, the flow characteristics are gradually determined by the modes, which are related to the features of the stall cells. When the compressor is operated under stable stall conditions, the low-order POD modes are composed of a series of harmonic modes, which are sinusoid-like in space and time with the frequency of the stall cell rotation.