Analysis of the dynamic behaviors of molten pool and keyhole for the oscillating laser welding of dissimilar materials stake welded T-joints with a gap

Abstract

The dynamic behaviors of molten pool and keyhole have the significant effects on weld quality and joint performance. To investigate the circular shaped oscillating laser welding (OLW) of dissimilar materials stake welded T-joints with a gap between the face plate (FP) and web plate (WP), a dynamic model of molten pool and keyhole for the OLW of dissimilar materials stake welded T-joints with a gap is developed and the dynamic behaviors of molten pool and keyhole during the weld formation process are analyzed and discussed in detail. Based on the calculated results, it is found that the laser beam mainly radiates on the front wall of keyhole and the hump is formed on the rear wall of keyhole relative to the moving direction of laser beam at the FP welding stage. At the gap penetration stage, the keyhole opening at the molten pool bottom of FP shows the trumpet-shaped characteristic and the molten pool is divided into the upper and lower parts by the gap. The formed gas cavity is separated and fused with the keyhole several times at the WP welding stage. The gap around the gas cavity is disappeared after the reintegration of the upper and lower parts of molten pool. The depth of molten pool shows the periodic fluctuation characteristic with time and the fluctuation period is nearly the same as the oscillation period of laser beam during the OLW process.