Abstract
Abstract Assessing and controlling the complex deformation behavior of textile reinforcements fabrics remains one of the major challenges in the production of fiber-reinforced plastics. In this paper, the draping of +45°/-45° biaxial non-crimp fabrics to a hemispherical shape is investigated with an eddy current imaging technique. After an automated draping process, the textiles are scanned with a robot-guided eddy current measurement system. From the resulting conductivity maps of the samples, the local yarn directions are extracted by image analysis and the paths of individual yarns are reconstructed for both the upper and the lower layer. Experiments are carried out for different forming speeds, blank holder forces and different non-crimp fabric parameters (stitch length, stitch type, stitch tension and yarn count). The influences of these parameters are compared and discussed, with the conclusion that blank holder forces have by far the most significant influence on the draping result. Sample experimental results are compared to results from an FEM draping simulation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
