Abstract
Mechanical behavior properties were investigated for cabinet-type cabinet doors in kitchen furniture and drawer bottoms and joints used as storage areas under load in accordance with relevant standards (BS EN 16122). In the first stage, values physical and mechanical for particle board (PB) and medium-density fiberboard (MDF) were determined. According to the test results in the second stage, it was determined that the doors assembled using a torque of 1.3 N/m in the door tests were less deformed than those assembled with 0.63 N/m. According to the finite element analysis and real test results carried out in the final stage, it has been determined that the vertical loading analysis applied on the doors coincides with the real experiments by 85%, horizontal loading by 84%, and slam shut by 50%. The doors didn’t pass the final stage durability test in real experiments, and the analysis results revealed that the deformation areas were the same as for real experiment. In the drawers; strength 85%, displacement 84%, and slam shut 94% overlap are represented. The drawers completed the durability test in real experiments, and in the analysis, it was determined that the deformation that occurred under high stresses was in the same areas.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.