Abstract
A large amount of construction and demolition waste (CDW) is generated during the construction of projects. In this paper, polyurethane foam adhesive (PFA) was used to improve the mechanical properties of CDW. The large-scale direct shear tests, California bearing ratio (CBR) tests and Scanning electron microscope (SEM) tests were carried out to study the variation regularities of mechanical properties of treated CDW during the laboratory tests. The test results show that the shear strength of CDW increases with the increase of PFA content, vertical pressure and the shear rate. However, the increase of vertical pressure on the shear strength of CDW is smaller than that of PFA, and the improvement of the shear rate is relatively small. The California bearing ratio (CBR) test also proves that PFA can effectively improve the bearing capacity of CDW and reduce the loss of CBR caused by the 4-day soaking. Scanning Electron Microscope (SEM) finds that polyurethane wraps multiple particles and enhances the internal connection, which results in the cohesion between the particles being greatly increased. The study presented in this paper will better assess the shear resistance of improved CDW with PFA as a substitute for pavement base materials in practical engineering applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
