Abstract

A power generator comprising a thermoelectric device (TED) and a phase change material (PCM) allows energy harvesting from ambient temperature variations, which exist ubiquitously; thus, such a device has received considerable attention as an energy harvester that can operate at any location. We developed a model for estimating the characteristics of a power generator in ambient air, whose temperature is forcibly changed between two temperature values, such as when an air conditioner is turned on and off. We calculated the influence of latent heat and thermal conductivity of the PCM on the characteristics of power generators with various thermal resistances between the TED/PCM interface and ambient air. Latent heat and thermal conductivity of the PCM affect the amount of heat energy (Q) transfer between the ambient air and PCM and the energy conversion efficiency (ηE), respectively, where the amount of electric energy is given by Q × ηE. The increase in Q caused by an increase in the latent heat of the PCM was almost independent of the thermal resistance between the TED/PCM interface and air. However, the increase in ηE caused by an increase in the thermal conductivity of the PCM decreased as the thermal resistance between the TED/PCM interface and air increased. These results indicate that the techniques to improve the power generation characteristics by increasing the thermal conductivity of PCM, which have been frequently investigated in recent years, are effective only when the thermal resistance between the TED/PCM interface and ambient air is small.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.