Abstract
This study was conducted to determine the physical and mechanical properties of particleboard. Manufacture of particleboard utilizes raw materials of rice husk with epoxy resin. The composition variations of rice husk : Epoxy are, 82:18, 77:23, 72:28. The rice husk was soaked in 5% NaOH solution for 1.5 hours, then smoothed and filtered with a size of 20 mesh. After preparation, the rice husk and epoxy were mixed with their respective compositions. Then the hot forging process was carried out with a pressure of 25 kg/cm2 at a temperature of 140° C for 8 minutes. The results of density test was found from 0.703 - 0.712 g/cm3, the water absorption value from 7.12 % - 8.75% and the thickness expansion value from 11.5% - 19.4%. The compressive strength (MOR) values range from 56.105 -82.63 kgf/cm3 and the flexural strength (MOE) values range from 8695 kg/cm2 - 10470.49 kg/cm2.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Advanced Research in Applied Sciences and Engineering Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
