Analysis of NaF precursor layers during the different stages of the Cu(In,Ga)Se2 coevaporation process

Abstract

ABSTRACTNaF precursor layers used for providing Na to Cu(In,Ga)Se2 (CIGS) grown on Na-free substrates have been studied. The NaF layers were deposited on top of the Mo back contact prior to the CIGS co-evaporation process. The co-evaporation process was interrupted after the preheating steps, and after part of the CIGS layer was grown. Completed samples were also studied. After the preheating, the NaF layers were analyzed with X-ray Photoelectron Spectroscopy and after growing part and all of the CIGS film, the Mo/NaF/CIGS stack was characterized using transmission electron microscopy (TEM) and secondary ion mass spectrometry (SIMS). The NaF layers were found to be stable in thickness and composition during the pre-heating in selenium containing atmosphere before the CIGS process. The TEM analyses on the partly grown samples show a layer at the CIGS/Mo interface, which we interpret as a partly consumed NaF layer. This is corroborated by the SIMS analysis. In finalized samples the results are less clear, but TEM images show an increased porosity at the position of the NaF layer.