Abstract
Traditional methods of disposing of oil-based drill cuttings do not provide the much-needed benign treatment. In this study, a skid-mounted thermal plasma processing device was developed with a designed maximum processing capacity of 0.8 kg/min. When the input power of the plasma torch is 10–50 kW, the temperature measured by the thermocouple is 385–1979 °C. After plasma treatment, the morphology of oil-based drill cuttings changes from jelly-like to vitreous state solid structure, and the content of organic matter decreases with the decrease in weight. Mass and volume reductions of 40.98–61.49% and 25.02–68.81%, respectively, were achieved in a treatment period of 0.5–3 min. The total organic compound reduction of 73.08–98.12% was equally achieved in the same treatment period. Due to the special structure of the glassy state residue, the leached concentration of toxic metals is far below the Chinese standard for landfill leachate discharge. This effectively solves the problem of secondary pollution of solid waste. Therefore, thermal plasma technology is an effective alternative method to treat oil-based drill cuttings.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have